Ultra-Bund - Drive Over Bunding
SpillTech® Ultra-Bund® – 150mm (STDB150)
- Made from Heavy Duty UV Stable Urethane, Ultra-Bund® is especially designed to withstand the rigors of workshop traffic. It will easily withstand car, forklift and heavy truck access.
- Excellent chemical resistance makes it ideal for bunding most class 8 corrosives, class 5 oxidisers and other non-flammable liquids.
- Pre-formed anchor points for dynabolts and right-angle corner pieces mean you can simply install Ultra-Bund® to suit any size configuration.
- Installation kits are also available.
- Dimensions: 1000mm (L) x 150mm (W) x 25mm (H)
SpillTech® Ultra-Bund® – 200mm (STDB200-SB)
- SpillTech® Ultra-Bund® is made from Heavy Duty UV Stable Urethane and is especially designed to withstand the rigors of workshop traffic. It will easily withstand car, forklift and heavy truck access.
- Excellent chemical resistance makes it ideal for bunding most class 8 corrosives, class 5 oxidisers and other non-flammable liquids.
- Pre-formed anchor points for dynabolts and right-angle corner pieces mean you can simply install Ultra-Bund® to suit any size configuration.
- Installation kits are also available.
- Dimensions: 1000mm (L) x 200mm (W) x 32mm (H)
SpillTech® Ultra-Bund® – 150mm Corner (STDB150C-SB)
SpillTech® Ultra-Bund® is made from Heavy Duty UV Stable Urethane and is especially designed to withstand the rigors of workshop traffic.
90° corner unit to fit Ultra-Bund® 150.
Come pre-drilled for dynabolts
Dimensions: Outside edge: 197mm; Inside edge: 48mm
90° corner unit to fit Ultra-Bund® 150.
Come pre-drilled for dynabolts
Dimensions: Outside edge: 197mm; Inside edge: 48mm
SpillTech® Ultra-Bund® – 200mm Corner (STDB200C-SB)
SpillTech® Ultra-Bund® is made from Heavy Duty UV Stable Urethane and is especially designed to withstand the rigors of workshop traffic.
90° corner unit to fit Ultra-Bund® 200.
Come pre-drilled for dynabolts
Dimensions: Outside edge: 245mm; Inside edge: 48mm
90° corner unit to fit Ultra-Bund® 200.
Come pre-drilled for dynabolts
Dimensions: Outside edge: 245mm; Inside edge: 48mm
SpillTech® Ultra-Bund® Install Kit – 5m (STDB-IK5-SB)
UltraBund® 5m Install Kit includes enough adhesive/sealant, dynabolts, spacers and instructions to install 5m of UltraBund® bunding.
Additional tools required (not supplied) include:
Measuring tape
Saw (if cutting is required)
Chalk line
Hammer Drill with 10mm Masonry bit
Cleaning solvent
Note: Components can be purchased separately should you be installing more or less than 5m.
Additional tools required (not supplied) include:
Measuring tape
Saw (if cutting is required)
Chalk line
Hammer Drill with 10mm Masonry bit
Cleaning solvent
Note: Components can be purchased separately should you be installing more or less than 5m.
UltraBund® Adhesive ADOS MS (STDBGLUE-SB)
ADOS MS Sealant is a high performance, one-component neutral curing adhesive sealant based on MS Polymers.
It has excellent primerless adhesion to all materials commonly used in the demanding building, construction and engineering industries.
It is ideal where silicone sealants are not suitable. ADOS MS Sealant will not stain and is compatible with commonly used paint systems.
It will not crack or show signs of aging when exposed to adverse weather conditions and harsh UV radiation. It does not contain solvents, isocyanates and silicones.
1 x 400g tube required for every 1700mm of UltraBund® bunding (approx.)
It has excellent primerless adhesion to all materials commonly used in the demanding building, construction and engineering industries.
It is ideal where silicone sealants are not suitable. ADOS MS Sealant will not stain and is compatible with commonly used paint systems.
It will not crack or show signs of aging when exposed to adverse weather conditions and harsh UV radiation. It does not contain solvents, isocyanates and silicones.
1 x 400g tube required for every 1700mm of UltraBund® bunding (approx.)
Ultra-Bund® Dynabolt (STDBDYNA-SB)
Flush head Dynabolt for use with SpillTech® Ultra-Bund® bunding.
Each SpillTech® Ultra-Bund® length has 6 pre-drilled holes for dynabolts.
SpillTech® Ultra-Bund® corners have 4 pre-drilled holes for dynabolts.
Dimensions: 10mm (Dia.) x 55mm (L).
Each SpillTech® Ultra-Bund® length has 6 pre-drilled holes for dynabolts.
SpillTech® Ultra-Bund® corners have 4 pre-drilled holes for dynabolts.
Dimensions: 10mm (Dia.) x 55mm (L).
UltraBund® 5mm Spacer (STDBS-SB)
5mm spacers for use when installing UltraBund® bunding
Used to correctly install UltraBund® to allow for expansion in the heat.
2 spacers for every 2 lengths are recommended.
Used to correctly install UltraBund® to allow for expansion in the heat.
2 spacers for every 2 lengths are recommended.
Related Products
Spillbusters Ltd: Phone: 021 833850 Email: paul@spillbusters.co.nz
