Spill Kit Accessories

SpillTech® Nitrile Drain Mat

Nitrile drain mat can quickly be placed over stormwater drain to temporarily stop or slow liquid spills from entering stormwater.

Constructed of 1.5mm thick nitrile rubber that is suitable for use with a wide range of chemical and hydrocarbon spills.

Recommended use with a gravel bag or sand bag to weigh nitrile mat down and create a better seal.

Available Sizes:
Dimensions: 600mm x 800mm x 1.5mm - (STDMAT- S)
Dimensions: 1.0m x 1.2m x 1.5mm - (STDMAT- L)

Plug'n'Dike Sealant (PND650-SB)

Plug n' Dike is a Non-toxic, non-flammable Epoxy blend forms an immediate seal when applied.

Apply Plug n' Dike paste directly over leaks, punctures and holes to form an immediate seal.

Seals and sticks to dirty and crumpled surfaces even with liquid flowing from them.

No surface preparation is required.

650g tub

SpillTech® Wheelie Bin Cover (SKWC-SB)

High visibility wheelie bin cover.

Clearly screen printed with the words "Emergency Spill Response Kit"

Elasticated for a secure fit on any 240L wheelie bin.

Clear pocket in front allows "Last Checked" documentation to be easily accessed.

Dustpan Set (DUSTPAN-SB)

Used to clear up absorbents after spills.

Dustpan Set includes: Dustpan and Brush.

Breakaway Red Cable Tie (CABLE15-PST23R)

Breakaway Red Cable Tie keeps your Spill Kit secure.

Dimensions: 230mm (L)

SpillTech® Clear Waste Bag (STPOLYBAG-SB)

SpillTech® Clear Waste Bag.

Dimensions: 600mm x 1200mm x 70mu

Contaminated Waste Bag (STHAZBAG-SB)

Heavy duty contaminated waste bags.

Anti-static

Used during the Rena oil spill clean-up

Hi visibility yellow with black "contaminated waste" printing.

Dimensions: 800mm(W) x 1200mm(L), 150mu

Roll contains 100 bags

Bio Hazard Plastic Bags (STBIOBAG-SB)

Heavy duty Bio Hazard Plastic bags.

Withstands 121°C steam autoclaving temperature.

High visibility red with black “Biohazard” printing.

Dimensions: 483mm(W) x 610mm(L) x 0.045mm (D)

Printed Asbestos Bag (PBA200-SB)

Clear plastic asbestos waste bag

Includes the warning "Warning Contains Asbestos - Asbestos Hazard - Wear Respirator and protective Clothing While Handling Contents"

Dimensions: 900mm (W) x 1200mm (H), 200 micron

Ultra Quick Release Shovel (UO404-SB)

Collapsible non-sparking response shovel with polyethylene scoop that is resistant to a wide range of chemicals.

Ideal for spill kits and cleaning up absorbent fibre and granules.

97cm length when assembled.

Ultra Absorbent Tarp (U8305-SB)

Use under machinery and equipment to catch fluid leaks during maintenance and repair. Rolls or folds into a small package for storage in vehicles for onsite repairs.

Keeps floor free of oily mess reducing slip hazard. Three layer system provides maximum protection: Top layer: UV resistant geotextile fabric allows oil to pass through.

Middle layer: Absorbent core made from oil only polypropylene traps oils but allows stormwater to evaporate.

Bottom Layer: Impermeable backing keeps drips from leaching through to the ground of workshop floor.

Dimensions: 1.5m x 1.5m - Absorbs up to 11L